IEC Magnetic Contactor, 1NC/1NO, 100V-250V AC/DC, 3 P, Non-Reversing, Screw Clamp

Description

<p>Schneider Electric IEC Magnetic Contactor, 3-pole, non-reversing, with 1NO/1NC auxiliary contacts. It uses a coil voltage of 100–250 V AC/DC and is rated for operation within specified motor control and resistive-load application parameters.</p> <p>- Coil Voltage: 100–250 V AC/DC</li> <li>- Poles/Main Contacts: 3 poles; 3 normally open main contacts</li> <li>- Auxiliary Contacts: 2 total; configuration 1NO/1NC</li> <li>- Reversing: Non-Reversing</li> <li>- Frequency: 50/60 Hz</li> <li>- Rated Voltage: 690 V AC</li> <li>- Full Load Amps: Resistive 60 A; Inductive 40 A</li> <li>- Rated Making Capacity: 800 A @ 440 V (Power Circuit); 140 A (AC Signalling); 250 A (DC Signalling)</li> <li>- Electrical Operating Durability: 2,000,000 (Power Circuit); 700,000 (Signalling Circuit)</li> <li>- Mechanical Durability: 6 Mcycles</li> <li>- Impulse Withstand Voltage: 6 kV</li> <li>- Enclosure / IP: Open design; IP20 rating, suitable for indoor environments</li> <li>- Dimensions: Depth 4.72 in; Height 4.8 in; Width 2.17 in</li> <li>- Net Weight: 0.992 kg</li> <li>- Mounting: DIN Rail, Plate</li> <li>- Environmental: Mercury Free; Pollution Degree 3</li> <li>- Wiring: Compatible with standard wiring connections; optional protective covers as applicable</li> <li>- Standards: UL Listed, CE, CSA, EN/IEC 60947-4-1, EN/IEC 60947-5-1, CCC, KC, UKCA</li> <li>- Phase: Three</li> <li>- Impedance: 1.5 mΩ</li> <li>- Hold VA: 1.8 VA</li> <li>- Inrush VA: 18 VA</li> <li>- Switching: Signalling Circuit 5 mA; 17 V</li> <li>- Non-Overlap Time: 1.5 ms</li> <li>- Overvoltage Category: CAT III</li> <li>- Maximum Temperature: maximum temperature ratings are based on standard operating conditions (note: actual device temperature limits should be verified)</li> <li>- Maximum Operating Temperature: 140°F</li> <li>- Maximum Voltage Rating: 690 V AC</li> <li>- Releasable / Non-Reversing: Non-Reversing</li> <li>- Fuse Amps / Protection: Not listed (include if needed)</li></ul></p>