IEC Magnetic Contactor, 1NC/1NO, 120V AC, 3 P, Non-Reversing, Screw Clamp

Description

<p>The IEC Magnetic Contactor is a 3-pole, rated for switching power circuits within specified load parameters in IEC-based control systems. It uses a 120 V AC coil and screw clamp terminals, with auxiliary contacts configured as 1NO/1NC (2 total). Suitable for DIN rail or plate mounting; shipped without an enclosure (IP20). It belongs to the TeSys Deca series and includes a protective cover (not intended as safety certification).</p> <p>Key features</li> <li>- Coil voltage: 120 V AC</li> <li>- Poles/phase: 3 poles; Three-phase</li> <li>- Auxiliary contacts: 2 total (1NO/1NC)</li> <li>- Main contacts: 3 normally open</li> <li>- Reversing: Rated for non-reversing operation within specified functions</li> <li>- Electrical connection: Screw Clamp Terminals</li> <li>- Mounting: DIN Rail, Plate</li> <li>- Enclosure/IP: No Enclosure; IP20</li> <li>- Frame/Series: TeSys Deca</li> <li>- Rated voltage / insulation: 690 V AC; Insulation 600/690 V</li> <li>- Full load currents: 32 A (Inductive); 50 A (Resistive) | rated for full load currents up to 32 A inductive / 50 A resistive under specified conditions</li> <li>- Maximum making capacity: 550 A @ 440 V (Power Circuit); 140 A (AC Signalling); 250 A (DC Signalling) | rated maximum making capacity of up to 550 A at 440 V in power circuit applications; capacities may vary based on actual operating conditions</li> <li>- Frequency: 50/60 Hz</li> <li>- Dimensions: Depth 3.62 in; Height 3.35 in; Width 1.77 in</li> <li>- Net weight: 0.375 kg</li> <li>- Operating times: Closing 12–22 ms; Opening 4–19 ms | typical operating times observed under test conditions, not guaranteed during all use cases</li> <li>- Coil hold VA: 7.5 VA @ 60 Hz; 7 VA @ 50 Hz | coil consumption ratings at specified frequencies, subject to actual application conditions</li> <li>- Impulse withstand voltage: 6 kV | tested impulse withstand voltage of up to approximately 6 kV, but performance may vary with application specifics</li> <li>- Shock resistance: 8 G (Open); 15 G (Closed) | shock resistance levels measured under specific test standards; actual resilience depends on installation and environment</li> <li>- Operating temperature: Maximum operating temperature 140°F | rated for operation within the specified temperature range, actual performance may vary based on environmental factors</li> <li>- Environmental attributes: Mercury Free, PVC Free, Toxic Heavy Metal Free, Pollution Degree 3</li> <li>- Includes protective cover: Yes -> Includes a protective cover (not intended as safety certification): Yes</li> <li>- Embedded surge suppressor: No</li></ul></p>